Download Print this page

Whistler PP500AC Owner's Manual page 4

High surge power inverter

Advertisement

WHISTLER PP500AC
equipment or appliance, run a test. The WHISTLER 500 is designed to
automatically shut down in the event of a power overload and testing appli-
ances and equipment with ratings in the 500 watt range will not damage it.
If a piece of equipment or an appliance in the 500 watt range will not
operate properly when first connected to the inverter, turn the inverter
rocker switch ON (I), OFF (0), and ON (I) again in quick succession. If this
procedure is unsuccessful, it is likely that the WHISTLER 500 does not have
the required capacity to operate the equipment or appliance in question.
Note:
Most heat generating appliances require start up loads in excess of
1000 Watts and the WHISTLER 500 will not operate such appliances
as coffee makers, irons, hair dryers or heaters.
a). ON/OFF Rocker Switch
b). LED Indicator Light. (GREEN
c). Two Standard North American AC Outlets are provided
d). High Speed Cooling Fan
e). 35 Amp Fuse Covers
f). Power Input Terminals (BLACK/Negative, RED/Positive)
g). Ground Terminal
cZ
WHISTLER PP500AC Inverter
Front View
Power ON, RED
=
WHISTLER PP500AC Inverter
Rear View
Overload)
=

Advertisement

loading