Generac Power Systems 0E6478 Parts Manual page 7

GENERAC POWER SYSTEMS, INC.
RECOMMENDED SCHEDULED MAINTENANCE PROGRAM
SERVICE WORK TO BE PERFORMED BY FACTORY-TRAINED PERSONNEL ONLY.
DEALER INFORMATION
NAME:
ACCOUNT #:
ADDRESS:
PHONE:
TECHNICIAN:
SIGNATURE:
PURCHASE DATE:
APPLICATION:
GENERATOR
MODEL NUMBER:
SERIAL NUMBER:
HOUR METER READING at Completion of the Inspection :
To prevent injury, perform the following steps in the order indicated before starting any maintenance:
• Disable the generator set from starting and/or connecting to the load by setting the control panel
Auto-Off-Manual switch to the "OFF" position.
• Remove the control panel fuse.
• Turn off the battery charger.
• Remove the negative battery cable.
The battery charger must be turned off BEFORE removing the battery cable to prevent an over current con-
dition from burning out sensitive control panel components and circuits.
Following all maintenance, reverse these steps to insure the unit is returned to standby setup for normal
operation when required.
START-UP DATE:
Standby Power
GENERATOR & TRANSFER SWITCH INFORMATION
!
6.8L GAS SERVICE RECOMMENDATIONS
OWNER INFORMATION
NAME:
ADDRESS:
SITE:
PHONE:
SIGNATURE:
Prime Power
MODEL NUMBER:
SERIAL NUMBER:
!
WARNING!
NOTE:
5
Rental/Trailerized
TRANSFER SWITCH