The Reset Button - Oregon Scientific BA-116 Instruction Manual

The comfort indicators will appear on the display when the
following conditions are satisfied:
Indicator Temperature
displays Range
on the unit
COMFORT 20°C to 25°C 40% RH to
(68°F to 77°F) 70% RH
humidity and
temperature
WET
Full Range
DRY
No Less than
Indicator 20°C(68°F) or
More than
25°C(77°F)
Humidity Shows that the
Range Current
Environment
Ideal range for
both relative
Over Contain excess
70%RH moisture.
Below Contain
40%RH inadequate
moisture
40%RH No comment
to
70%RH
HOW TO SELECT THE
TEMPERATURE THE UNITS OF
MEASURE
The switch on the back of the Barometer selects between
degrees Celsius and Fahrenheit. To select Celsius units, set
the switch to °C. To select Fahrenheit units, set the switch to
°F.
HOW TO SELECT THE PRESSURE
UNITS OF MEASURE
The switch on the back of the Barometer selects between mb
/ hPa and inHg. To select mb / hPa , set the switch to mb / hPa.
To select inHg, set the switch to inHg.

THE RESET BUTTON

If the unit does not operate properly, use a pointed object to
push the [ RESET ] button once, which is located on the back
of the unit.
6