File Naming; Setting The Tv Out; Setting Usb Port - BenQ DC C1000 User Manual

3.16.6 File Naming

File name begins with "DSCI" and are followed by a 4-digit number that increases in
sequence. File numbering starts from 0001 when a new folder is created.
If the highest folder number is 999 and highest file number exceeds 9999, the camera will
display the warning message "Folder cannot be created". When it appears, try one of the
following ways:
•
Reset the file number and plug in a new memory card, refer to 3.16.5 "Resetting the
File Numbers" on page 22.
•
Format the memory, refer to 3.20 "Formatting the Memory" on page 24. The folder
number and file number are initialized and renumbered from 100 and 0001 respec-
tively.
•
Do not change the folder and file names in the memory card using your computer. It may
be unable to playback the data using the digital camera.

3.17 Setting the TV Out

Your camera can be connected to a TV allowing you to preview images and movie clips on
the television screen. TV Out should be set to either NTSC or PAL depending on your region.
For detail operation, refer to 3.4.5 "Setup Menu" on page 9 and 4.2 "Connecting the Camera
to a TV" on page 25.

3.18 Setting USB Port

You can set USB mode to connect the camera with a printer or computer. For detail
operation, refer to 3.4.5 "Setup Menu" on page 9 and 4.3 "Connecting the Camera to a
Computer with a USB Cable" on page 26.
Option Description
Computer To connect your camera to a PC.
Printer To connect your camera to a printer.
Using the Camera 23