Setup Mode; Date/Time; Format; Beeper - BenQ DC C500 User Manual

BenQ DC 5530 User's Manual
3.4

Setup mode

You can select according to your preference for the camera settings in [Setup] of [Capture] /
[Video] / [Playback] menu. Navigate the options you wish to configure by using the [
[ ] button.
Capture Setup

Date/Time

Next Menu
Next Menu

Format

Beeper

OFF

Language

English
5 Min

Power Off

Next Menu

Set To Default

Exit

: Select Page
OK: Adjust
3.4.1 Date/Time
This sets the date and the time.
For details, refer to 3.1.4 "Setting the date and time" on page 7.
3.4.2 Format
This utility formats the internal memory (or memory card) and erases all stored images and
data.
3.4.3 Beeper
Specify whether or not beeps are to be generated when buttons are pressed.
[ON]: Beeps are generated.
[OFF]: Beeps are not generated.
3.4.4 Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
3.4.5 Power Off
If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful to reduce battery wear.
•
[3 Min], [5 Min], [10 Min], [OFF]
3.4.6 Set to Default
This function will restore all the parameters to the default settings.
•
[Cancel]: Remain the current settings
•
[Execute]: Reset to default settings
3.4.7 Exit
Select this option if you wish to exit from the menu mode.
18 Using the DC C500
Video
Date/Time
Format
Beeper
Language
Power Off
Set To Default
Exit
: Select Page
OK: Adjust
or :Select Item
Setup Playback
Next Menu Delete/Time
Next Menu
Format
OFF Beeper
English Language
5 Min Power Off
Next Menu Set To Default
Exit
OK: Adjust
or :Select Item
Setup
Next Menu
Next Menu
OFF
English
5 Min
Next Menu
:Select Page
or :Select Item
] /