Table of Contents
Advertisement
3.4
Setup mode
You can select according to your preference for the camera settings in [Setup] of [Capture] /
[Video Output] / [Play] menu. Navigate the options you wish to configure by using the [
/ [
] button.
3.4.1
Date/Time
This sets the date and the time.
For details, refer to 3.1.4 "Setting the date and time" on page 7.
3.4.2
Format
This utility formats the internal memory (or memory card) and erases all stored images and
data.
3.4.3
Beeper
Specify whether or not beeps are to be generated when buttons are pressed.
[On]: Beeps are generated.
[Off]: Beeps are not generated.
3.4.4
Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
3.4.5
Auto Off
If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful to reduce battery wear.
•
[3 Min], [5 Min], [10 Min], [Off]
3.4.6
System Reset
This function will restore all the parameters to the default settings.
•
[Cancel]: Remain the current settings
•
[Execute]: Reset to default settings
3.4.7
System Info
Display the current firmware version of the camera.
18
Using the Camera
]
Advertisement
Table of Contents
