WORKSHEETS
The following worksheets can be used to plan I/O module installation for the M4RTU/M4 I/O base unit and
M4RTUX I/O extender unit.
Worksheet Instructions
Fill in the digital or analog I/O type in the box to the right of each I/O channel shown on the worksheet.
The following is an example of a completed worksheet:
*
Figure F-1: Sample I/O Module Worksheet
When configuring digital or analog I/O for the M4RTU/M4 I/O base unit using OptoControl, use these
addresses and make sure the PORT type is LOCAL. See Chapter 4 (Software and Firmware) for more
information.
APPENDIX F
M4RTU/M4 I/O User's Guide 87