Table of Contents
Advertisement
126.2943.04.qxd
6/3/08
54 installation
Installation
Transit security bars
Before starting the machine up, the
transport security bars must be
removed as follows:
You are advised to keep all the transport
security bars. In case the appliance has
to be transported again.
P0287
1. Unscrew and remove the three rear
screws by means of a key.
P0018
2. Lean the appliance back on the rear
and fit one of the polystyrene angles
between the appliance and the floor.
Make sure the hoses are not
squashed.
19:00
Página 54
3. Open the porthole, and remove the
4. Place the machine in an upright
5. Plug the 3 holes with the plastic plugs
polystyrene block fitted with the
adhesive tape on the door seal.
P0001
position and remove the three plastic
bolts.
P0002
which you can find in the envelope
containing the instruction booklet.
Advertisement
Table of Contents
