Icom IC-F12 Instruction Manual page 16

4
PROGRAMMABLE FUNCTIONS
D D SCAN FUNCTION
The scan function allows you to search a pre-programmed group
of channels for signals.
Push the [Scan] switch to start/stop scan.
• Scan pauses on a channel when receiving a signal.
• "Lockout SCAN" (pre-programmed list SCAN) or "Priority SCAN"
can be pre-programmed.
• When the "Power-save function" is activated, the transceiver
checks all pre-programmed channels then returns to the "Power-
save function" again.
D D HIGH/LOW POWER OUTPUT
This function selects high or low power for a channel.
Push the [High/Low] switch to toggle between high and low power.
13