Gemini PS-626USB Operation Manual page 4

INTRODUCTION:
Congratulations on your purchase of Gemini PS-626USB 10" 3 channel
stereo mixer. This-state-of-the-art mixer features the latest technological
advances and is backed by a 1 year warranty, excluding the cross fader.
The cross fader is backed by a separate 90 day warranty.
Prior to use we suggest that you carefully read all the instructions.
FEATURES:
- 10" 3 Stereo channel mixer
- 6 line, 2 convertible phono/line, RCA inputs, 1 USB i/o
- Removable face plate for user replaceable Rail Glide cross fader
- 3 band rotary line EQ with cut feature & rotary gain channel control
- Cue Ch1/Ch2/Ch3 switch
- Rotary cue volume, CUE/PGM rotary knob
- Dual VU display with mode switch
- Master volume rotary control
PRECAUTIONS:
1. All instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open the unit.
Please refer all servicing needs to a
technician.
3. Do not expose this unit to direct sunlight or a heat source such
as a radiator or stove.
4. This unit should be cleaned only with a damp cloth. Avoid sol-
vents or other cleaning detergents.
5. When moving this equipment it should be placed in its original
carton and packaging. This will reduce the risk of damage during
transit.
6.
7.
CONNECTIONS:
Ensure that the
1
is in the position prior to making any connections.
2
This unit comes with a
socket before plugging it in to a proper power
source.
3
The
connects the mixer to your main amplifier using standard audio ca-
bles with RCA-type connectors.
4
The
The output jacks can be used to connect the mixer to the
record input of your recording unit, thus enabling you to record your
mix with cables.
5
The allows you to connect the
or desktop . Once you have connected the standard high
speed cable (not-included) from the
computer you will be able to simultaneously playback and record out
of the same cable, (see
setup your computer to work with the
-qualified service
.
.
. Plug in to the rear panel
to your Laptop
to your
setup for instructions on how to
).
6
The has
These small switches which are located to the right of the
inputs for channels 1 and 2 allow you to choose between a
(Turntable) input or a
etc..).and require the proper switching.
When switched to the
magnetic cartridge, remember to connect your ground wire (see
) or there may be a system hum
And when the switch is in the
level device as described before (Mp3, CD, Tape etc).
NOTE: CONNECTING A LINE LEVEL DEVICE TO A PH INPUT MAY CAUSE THAT
MIXER CHANNEL TO OVERLOAD AND OR DISTORT.
Now you may plug the
input to be connected to thier respective
7
When using (a) turntable(s), you will need to ground the
cable(s) by screwing in the grounding fork(s) to the
located on the rear panel of the
Attach a (Turntable) ground line to the silver
that is situated at the bottom middle of the rear
panel.
8
The main or Microphone input is located in back right hand
corner of the
You can control the gain and even set the low's and the high's for the
mic (See ).
9
The
corner of the
1/4" connector and or adaptor and will allow you to
program before you play it, you can adjust the volume and
of the (see
Then when all of your connections have been made turn on the
mixer by pressing the
CONTROLS:
10
Allows you to adjust the volume of the microphone signal.
11
Let's you to control the low frequency and the high frequency of the
microphone signal.
12
The
which input will be controlled by that channels corresponding
volume .
For example on
choose between
the
tween
choose between and the
PS-626USB
level (Mp3, CD, Tape player
position you may use any Turntable with a
position you may connect any line
's from your playable medium into each
mixer.
and will accept a standard 1/4" connector.
located at the front bottom right hand
will accept any headphone with a standard
).
.
switches allow you to choose
the allows you to
and , and also on
will let you choose be-
and and on
input.
.
your music
mix
you can
4