Getting Started; Charging The Battery; Turn The Gemini On And Off; Adjusting Volume - Gemini Gemtek PT300 User Manual

Getting Started

Charging the Battery

• For the initial charging of the battery, it is recommended that the unit
remain in the "Off " postition.
1. Insert the Home Charger plug into "Charger Jack" on your Gemini unit (See
"Description of Unit" on page 3 for location of jack).
2. Plug the other end of the home charger into an electrical outlet.
3. Signal Light is orange while charging.
Turn the Gemini On and Off
1. Locate the On/Off switch on the Gemini unit.
2. Push the On/Off switch to the "On" position.

Adjusting Volume

1. Press "Volume/Test Button" to adjust sound level while using the unit during
a phone call. (Volume adjustment sequence: Medium > High> Low)

Answering a Call

1. Press the "Answer" Button for 2 seconds. There will be one beep and signal
light will blink green once.

Ending a Call

1. Press the "Hang-up" Button for 2 seconds. There will be one beep and signal
light will blink green once.
User Manual.indd 7
7
2/2/06 10:27:48 AM