What To Do, When; Fault Warnings Are Displayed - Electrolux ESF6220 User Instructions

What to do, when ...

Try to rectify minor faults on the dishwasher with the
aid of the instructions given here. If you call in cus-
tomer service to resolve one of the malfunctions
listed here, or rectify an error made in the operation
of the appliance, the customer service engineer's visit
is not free of charge, even during the period of guar-
antee.

...Fault warnings are displayed.

• If the top or middle light in the display is flashing
you can probably rectify the fault yourself.
Once the fault has been rectified press the On/
Off- button. The wash program will continue. If
Symptom
The top light in the
multidisplay is flashing.
There is no water
entering the dishwasher
The middle light is flashing
in the multidisplay.
The top and the
middle light are flashing in
the multidisplay.
Possible Cause
Tap is blocked or furred with lime-scale.
The filter (where present) in the threaded
hose fitting is blocked.
The water inlet hose is connected
wrongly.
The sink outlet is blocked.
The water drain hose is connected
wrongly.
The anti-flood system has been triggered.
the fault is displayed again, contact your local
Service Force Centre.
• If other lights in the multidisplay flash, please
contact Service Force and let them know which
fault indicator is flashing.
Clean tap.
Clean the filter in the threaded hose
fitting.
Check hose installation.
Clean the sink outlet.
Check hose installation.
Close the tap and contact AEG Serv-
ice Force.
Solution
23