ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • Do not use multi-plug adapters and ex- pliance, carefully read the supplied in- tension cables. structions. The manufacturer is not re- • Make sure not to cause damage to the sponsible if an incorrect installation and mains plug and to the mains cable.
Page 4
www.electrolux.com from the mains socket. Contact the • Do not drink and play with the water in Service to replace the water inlet hose. the appliance. • Do not remove the dishes from the ap- 1.3 Use pliance until the programme is comple- ted.
www.electrolux.com Indicators Description Washing phase indicator. It comes on when the washing phase and the rinsing phases operate. Drying phase indicator. It comes on when the drying phase oper- ates. End indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator.
ENGLISH 5. BEFORE FIRST USE 1. Make sure that the set level of the wa- 3. Fill the rinse aid dispenser. ter softener agrees with the water 4. Open the water tap. hardness in your area. If not, adjust 5. Processing residues can stay in the the water softener.
www.electrolux.com • E.g. 5 flashes + pause + 5 flashes = Electronic adjustment level 5. 1. Make sure that the programme marker 4. Press Start again and again to on the knob is aligned with the on/off change the setting. Each time you indicator.
ENGLISH 5.3 Filling the rinse aid dispenser Press the release button (D) to open the lid (C). Fill the rinse aid dispenser (A), no more than the mark 'max'. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam.
Page 10
10 www.electrolux.com 6.1 Using the detergent Press the release button (B) to open the lid (C). Put the detergent in the compartment (A) . If the programme has a prewash phase, put a small quantity of deter- gent in the compartment (D). If you use detergent tablets, put the tablet in the compartment (A).
ENGLISH Make sure that there is detergent Starting a programme with delay in the detergent dispenser before start you start a new programme. 1. Set the programme At the end of the programme 2. Press Delay to delay the start of the programme of 3 hours.
12 www.electrolux.com • Put the light items in the upper basket. 7.3 Loading the baskets Make sure that they do not move. Refer to the supplied leaflet with • Make sure that the spray arms can examples of the load of the bas- move freely before you start a pro- kets.
ENGLISH To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C). Assemble the filter (A) and put it into position in filter (B).
14 www.electrolux.com WARNING! Deactivate the appliance before you do the checks. Turn the knob until the programme marker is aligned with the on/off indicator. Problem Possible solution You cannot activate the appli- Make sure that the mains plug is connected ance.