Table of Contents
Advertisement
Instructions for totally built-in
appliances
Dimensions of the recess
Height of housing
Depth of housing
Width of housing
PR 32
1. It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
D526
For safety reasons, minimum ventilation must be
as shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
D132
2.
Apply joint the sealing strip as shown in figure.
mm 880
mm 550
mm 560
880
50 mm
min.
cm
3. Slide the appliance into the recess, pushing it
against the wall on the handle side.
4. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
2
pliance hinges. Fasten the appliance with 4 screws
200
provided in the kit included with the appliance.
Snap vent grille (C) and hinge cover (D) into
position.
5. Apply covers (B) on joint cover lugs and into hinge
holes.
24
A
D022
D
D727
B B
D013
C
Advertisement
Table of Contents
