Table of Contents
Advertisement
Door reversibility
The appliance's door has been locked in position for
transport by means of pins on both sides. According
to the door opening direction, remove relevant pins at
the top and at the bottom.
D163
Warning!
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting
of the gasket or accelerate this process by
heating up the part involved with a normal
hairdrier.
Instructions for totally built-in
appliances
Dimensions of the recess
Height of housing
Depth of housing
Width of housing
PR 32
1. It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
A
B
mm 880
mm 550
mm 560
880
For safety reasons, minimum ventilation must be
as shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
2.
Slide the appliance into the recess, pushing it
against the wall on the handle side.
3. Apply joint the sealing strip as shown in figure.
18
50 mm
D526
A
D022
D132
min.
2
cm
200
Advertisement
Table of Contents
