Extra Rinse Button; Delay Start Button; Quick Wash Button - Electrolux EW1085F Instruction Booklet

Spin speed
The following speeds are available for the different
fabrics:
• Cotton, linen:
450/650/850 max 1000 r.p.m.
• Synthetics, wool:
450/650 max 850 r.p.m.
• Delicates:
450 max 650 r.p.m.
No spin
By selecting this option the spinning phases are
suppressed.
This function is not available for cotton and linen.
To be selected for extremely delicate items.

7 Quick wash button

By pressing this button the washing time is reduced
as follows:
• 52 minutes for cotton 95°C
• 63 minutes for cotton 50°C
• 72 minutes for cotton 40°C and 30°C
• 24 minutes for synthetics
• 8 minutes for delicates
This option is not available with the wool programme
and the Energy saving programme.
To be used for lightly soiled laundry.
8 "Rinse Hold" button
By selecting this option the water of the last rinse is
not emptied out, to prevent the fabrics from creasing.
When the programme has finished, the pilot light of
the START/PAUSE button flashes and the phase
light remains lit to indicate that the water must be
emptied out.
To empty out water there are 3 possibilities:
• Select programme "D" (draining):
The water is emptied out without spinning.
Attention! Before selecting programme "D" the
selector dial has to be positioned on O (reset).
• Depress START/PAUSE button
emptying, the machine performs the spin cycle
corresponding to the type of fabric previously
selected.
• Select the spin speed by means of the relevant
button and then depress the START/PAUSE
button.
9 Intensive wash button
By depressing this button the washing time is
prolonged by approx. 15 minutes for cottons and 10
minutes for synthetics. This option cannot be used
together with QUICK and ECONOMY programmes.

10 Extra rinse button

Can be used with all programmes except the wool
programme. The machine performs 4 rinses instead
of 3.
This option is recommended for people who are
allergic to detergents and in areas where the water is
very soft.

11 DELAY START button

The wash programme can be delayed from 1 hour
up to a maximum of 24 hours by means of this
button.
• Switch the machine on by depressing the ON/OFF
button
• Select the programme and the required options.
• Select the delay start.
• Depress START/PAUSE button
starts its hourly countdown.
The programme will start after the selected delay has
expired.
• Depress START/PAUSE button
• Depress DELAY START button until the required
time is displayed.
If you wish to cancel the delay, depress the button
only once: the symbol 0 h is displayed.
• Depress START/PAUSE button again.
12 DISPLAY
The display shows the following information:
Cancelling - Duration of the programme -
Delayed start - Incorrect option selection - Alarm
: after
code.
If a programme has been cancelled - programme
selector dial on position O - three flashing dashes
11
Selecting the delayed start
.
: the machine
Altering the delayed start
.
Cancelling