Electrolux EW1085F Instruction Booklet page 12

appear on the display.
Now you can select a new programme.
Duration of the selected
programme
After selecting a programme, the duration is
displayed in hours and minutes ( for example 2.05).
The duration is calculated automatically on the basis of
the maximum recommended load for each type of fabric.
After the programme has started, the time remaining
is updated every minute.
When the programme has finished a flashing zero
is displayed.
If you have selected the Anti-crease option
zero will not flash.
Delayed start
The selected delay (24 hours max) set by means of
the relevant button appears on the display for 4
seconds, then the duration of the previously selected
programme is displayed.
The countdown is updated every hour.
If an option which is not compatible with the set wash
programme is selected, the message Err is
displayed.
In the event of operating problems, some alarm
codes can be displayed, for example E20 (see
paragraph "Something not working").
, the
12
Incorrect option selection
Alarm codes