Delay Start Button; Extra Rinse Button - Electrolux EW 1233I Instruction Booklet

7 Extra Quick button
By pressing this button the washing time is reduced
as follows:
• 42 minutes for cotton 90°C
• 53 minutes for cotton 40°C
• 16 minutes for synthetics 60°C
• 21 minutes for delicates
This option is not available with the wool programme
and the Energy saving programme (programmes
with E).
To be used for lightly soiled laundry and cycle
duration will be reduced.

8 Extra rinse button

This option can be selected with all programmes
except the wool programmes. The machine will
perform 2 additional rinses for cotton and 1 rinse for
synthetics and delicates.
To be used in areas where the water is very soft or
for people allergic to detergents or who have very
delicate skin.
9 Anti-crease button
When this button is pressed, the last rinse water is
not emptied out, to prevent the fabrics from creasing.
When the programme has finished, the pilot light of
the START/PAUSE
are on, and the door is blocked to indicate that
and
the water must be emptied out.
To empty out water there are 2 possibilities:
• Select programme
The water is emptied out without spinning.
• Select programme
speed by means of the relevant button and then
depress the START/PAUSE button. The water is
emptied out and the laundry is spun at the selected
spin speed.
Attention! Before selecting programme
the selector dial has to be positioned on O
(cancelling).
button goes off, the lights
(draining):
(spinning). Select the spin
or

10 Delay Start button

The wash programme can be delayed from 30 min -
60 min - 90 min, 2 hours and then by 1 hour up to a
maximum of 23 hours by means of this button.
Selecting the delayed start
• Select the programme and the required options.
• Select the delay start.
• Depress START/PAUSE button: the machine
starts its hourly countdown.
The programme will start after the selected delay has
expired.
Cancelling the delayed start after the programme
had started
• Depress START/PAUSE button
• Depress DELAY START button until «
displayed.
• Depress START/PAUSE button again
restart the programme.
11 START/PAUSE button
This button has two functions:
Start - Pause
After having selected the required programme, press
this button to start the machine; the corresponding
pilot light stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the
programme or the delay appears on the display.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
40
.
0'
» is
to
Start
Pause