Table of Contents
Advertisement
7. Once inserted, make sure the two red buttons
have snapped out.
8. Replace the drip tray and waste coffee con-
tainer.
9. Close the service door.
Cleaning the milk container
Important! Always clean the tubes inside
the milk container (C) when you prepare milk. If
there is still milk in the container, do not leave it
out of the refrigerator for longer than strictly ne-
cessary. Clean the container each time you pre-
pare milk as described in Note 3 in the section
"Making cappuccino".
1. Turn the milk container lid clockwise then re-
move it.
2. Remove the milk spout and intake tube.
Spout
Milk intake
tube
3. Remove the fro-
thed milk regula-
tor by pulling it
outwards.
4. Wash all the com-
ponents thorou-
ghly
with
hot
water and mild
washing-up
li-
quid.
Make sure there
are no milk resi-
dues left inside
Groove
Frothed milk
regulator
Hole
Hole
the holes and the groove on the fine end of
the frothed milk regulator.
5. Check that the intake tube and spout are not
clogged with milk residues.
6. Replace the frothed milk regulator, milk spout
and intake tube.
7. Replace the milk container lid.
Cleaning the coffee jug
Clean the jug with a damp cloth and mild washing
up liquid.
N.B.! To avoid damaging the appearance
of the jug, do not wash in a dishwasher.
CHANGING AND SETTING
MENU PARAMETERS
When the appliance is ready, you can use the in-
ternal menu to modify the following parameters
and functions:
•
Choose language
•
Rinsing
•
Shut-off time
•
Set clock
•
Start time
•
Auto-start
•
Temperature
•
Water hardness
•
Program coffee
•
Program cappuccino
•
Program jug
•
Program water
•
Descale
•
Reset to default
•
Statistics
•
Install filter
•
Reset filter
•
Buzzer
•
Contrast
Setting the language
To change the language on the display, proceed
as follows:
•
Press the
21
icon (B2) to enter the menu.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
