NO froth
"Denser" froth
frothed milk
regulator
"Less dense" froth
•
Remove the hot water spout (fig 6) and at-
tach the milk container to the nozzle (fig. 25).
•
Position the milk tube as shown in fig. 26 and
then place a sufficiently large cup under the
coffee and milk spouts.
•
Press the
icon (B12). "CAPPUCCINO..." is
displayed and after a few seconds, frothed
milk flows out of the milk spout into the cup
below. (Delivery stops automatically).
•
The appliance delivers the coffee.
•
The cappuccino is now ready. Sweeten to
taste and, if desired, sprinkle the froth with a
little cocoa powder.
NOTE 1: While making cappuccino, the flow of
frothed milk or coffee can be interrupted by pres-
sing the
icon (B12).
NOTE 2: If the milk in the container finishes while
delivering frothed milk, remove the container and
add milk. Then re-attach it and press the
(B12) to request cappuccino again.
NOTE 3: To ensure the complete cleanliness and
hygiene of the milk frother, always clean the cir-
cuits in the milk container lid after making cap-
puccino. "PRESS CLEAN!" flashes on the display.
•
Place a recipient under the milk spout (fig.
26).
•
Press the CLEAN button on the lid (C3) and
hold down for at least 5 seconds (fig. 26) to
start the cleaning function. The appliance di-
splays the message "CLEANING" above a pro-
gressive bar.
You should not release the CLEAN button
until the bar is complete indicating that clea-
ning is concluded.
When the CLEAN button is released, the fun-
ction stops.
After cleaning, remove the milk container and
place in the refrigerator. The milk should not
be left out of the refrigerator for more than
15 minutes.
NOTE 4: To change the quantity of coffee or fro-
thed milk the appliance delivers automatically
into the cup, proceed as described in the section
"Changing the quantity of coffee and milk for cap-
puccino".
CHANGING THE QUANTITY
OF MILK AND COFFEE FOR
CAPPUCCINO
The appliance is set by default to automatically
deliver a standard cappuccino.
To change these quantities, proceed as follows:
Changing the quantity of milk
•
Fill the container with milk up to the maxi-
mum level indicated on the container.
•
Press the
(fig. 15), then press the
and (B8) (fig. 2) until "PROGRAM CAPPUC-
CINO" is displayed.
•
Press the OK icon (B9) to confirm.
"PROGRAM MILK" is displayed.
icon
•
Press the OK icon (B9) again.
•
Select the quantity of milk required by pres-
sing the
The progress bar shows the quantity of milk
selected.
•
Press the OK icon (B9) to confirm (or the
ESC icon (B6) to cancel the operation).
•
Press the ESC icon (B6) (fig. 18) twice to exit
the menu.
Changing the quantity of coffee
•
Press the
(fig. 15) or press the
(B8) (fig. 2) until "PROGRAM CAPPUCCINO"
is displayed.
•
Press the OK icon (B9) to confirm then the
"COFFEE FOR CAPPUCC." is displayed.
•
Press the OK icon (B9) again.
•
Select the quantity of coffee required by pres-
17
icon (B2) to enter the menu
icons (B7) and (B8).
icon (B2) to enter the menu
icons (B7) and (B8) (fig. 2) until
icons (B7)
icons (B7) and