Electrolux EWF1495 Instruction Booklet page 12

usermanual 1495 au_5.qxp 11/6/2006
LANGUAGE
You can change the language setting if you would like
the indicators in the display to appear in a different
language.
Example:
1. Enter the Menu option and select the Language
setting.
2. Press the «Change» button to select the desired
Language.
CLOCK
The clock setting option permits you to set the
current time in the memory. It is important to set it
correctly as the display indicates the cycle end time
when you select a programme (refer item 3).
To set the current time of day:
1.Turn the power ON and select any Programme.
(E.g. Cotton)
2.Press the <<OPTIONS>> button repeatedly until
"Setup" appears in the display.
3.Press the <<CHANGE>> button to select the
"Setup" function.
4.Press the <<OPTIONS>> button repeatedly until
"Clock: Set Time" appears in the display.
5.Set the time by pressing the <<CHANGE>> button.
A short press will advance the time by 1 minute.Hold
the << CHANGE>> button down and the time will
advance in 10 minute increments.
6.Press the << EXIT>> button.
5:53 PM Page 12
BRIGHTNESS
The Brightness setting allows you to modify the
backlight intensity of the display.
Example:
Note:
At the end of the programme if no button is pressed
for approximately 10 minutes the backlight intensity
goes off.
12
1. Enter the Menu option and select the Brightness
setting.
2. Use the "Change"button to set up the desired
brightness level.