Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for J5create Display Adapter
Summary of Contents for J5create Display Adapter
- Page 1 USB 3.0 Display Adapter User Manual JUA310/330 Manual...
-
Page 2: Table Of Contents
Table of Contents INTRODUCTION ........................3 GETTING STARTED –Notes for Before Installation ............... 8 INSTALLATION FOR WINDOWS 8,7 ................9 INSTALLATION FOR WINDOWS XP ................18 INSTALLATION FOR MAC .................... 27 FUNCTIONS INSTRUCTIONS: WINDOWS 8,7 ............... 35 FUNCTIONS INSTRUCTIONS: WINDOWS XP ..............43 FUNCTIONS INSTRUTIONS: MAC ................. -
Page 3: Introduction
USB 3.0 port. No need to open up the computer to add an expensive video card, with the USB 3.0 Display Adapter you simply load the drivers, plug in the adapter to the USB port, then plug in the VGA/DVI monitor cable into the adapter and you are ready. - Page 4 Efficient editing of documentation on one screen and researching reference materials on the other Presentation: • Use mirror mode while your laptop is plugged into a projector through the USB 3.0 Display Adapter • Use Primary mode to have two monitors and projector for creative displays Office: •...
-
Page 5: Optimal Performance
*Playing Video with multiple monitors: only “Media Player Classic” is supported. Note: To ensure that your device is equipped with the most current driver, please visit our website at www.j5create.com and install the latest driver for this model. Physical Specifications Model: JUA 310... - Page 6 USB DISPLAY ADAPTER USER MANUAL Power Mode Bus-powered or Self- Powered Power Consumption ≦500mA Physical Specification Housing Material Aluminum Dimensions Main body: 41(W)x 72(H)x14(D) mm Cable length: 200 mm Weight Approximately 58 g Model: JUA 330 Interface Host Interface USB 3.0 Female Type-A Connector...
- Page 7 1280 x 1024 16,32 bits 1280 x 960 16,32 bits 1152 x 864 16,32 bits 1024 x 768 16,32 bits 800 x 600 16,32 bits Package Contents USB 3.0 Display Adapter(JUA310/330) Quick Installation Guide Driver CD with E-Manual ...
-
Page 8: Getting Started –Notes For Before Installation
Run the setup program as an administrator to avoid errors in installation Uninstall the previous driver first before updating the latest driver Connect the VGA/DVI connector of USB Display Adapter to the VGA/DVI cable of display device first before connecting to USB port of computer ... -
Page 9: Installation For Windows 8,7
“Computer”, Click on your optical drive, and manually run the setup CD by double-clicking on “Setup.exe” ※Please make sure the USB cable of USB 3.0 Display Adapter is unplugged from your PC or Notebook before executing the installation program. - Page 10 USB DISPLAY ADAPTER USER MANUAL 2. After pressing the installation option, the InstallShield Wizard will launch, click Next> to continue 3. Read the license agreement and check “I accept the terms of the license agreement.” Click Next > to accept it and continue.
- Page 11 USB DISPLAY ADAPTER USER MANUAL 4. Driver installation proceeding….. 5. When Install Shield Wizard is complete, select “Yes, I want to restart my computer now.” Click Finish to restart.
- Page 12 VGA/DVI connector of USB Display Adapter and turn on the display device. 7. Connect the USB 3.0 Display Adapter into an available USB port of a PC or Notebook, After Inserting the USB 3.0 Display Adapter into an USB port, the “Installing device driver software”...
- Page 13 A. Connect all external display devices (monitor/ projector) to the VGA/DVI connector of USB 3.0 Display Adapters and switch power on. B. Connect the USB 3.0 Display Adapter into an available USB port of a PC or Notebook. After Inserting an USB 3.0 Display Adapter into a USB port, the systems will automatically start the installation procedure and the prompt message will pop-up on the task bar.
- Page 14 USB DISPLAY ADAPTER USER MANUAL You can modify the corresponding position of each extend display via display settings. Go to “START” → “Control Panel” → “Appearance and Personalization” → “Adjust screen resolution” ※ Right-click on the desktop and go to “Screen Resolution”...
- Page 15 Verify Device Driver Installation The following procedure helps you to verify the driver installation status of the USB 3.0 Display Adapter. Right-click “My Computer” “Manager” “Device Manager” click “+” sign of “Sound, video and game controllers” & “Universal Serial Bus controllers”...
- Page 16 The picture below shows the installation process for a Multiple USB 3.0 Display Adapter Device Driver Un-installation ※ Unplug the USB 3.0 Display Adapter before un-installing the driver. 1. Click “Start”→ Control Panel → Programs and Feature→ Uninstall or Change a Program Select j5 VGA/DVI DISPLAY ADAPTER ... Click...
- Page 17 USB DISPLAY ADAPTER USER MANUAL 2. A message will appear asking if you want to remove the selected application. Click ‘ok’ to continue. 3. Driver un-installation proceeding…. 4. When the driver uninstall is completed select “Yes, I want to restart my...
-
Page 18: Installation For Windows Xp
“Computer”, Click on your optical drive, and manually run the setup CD by double-clicking on “Setup.exe” ※Please make sure the USB 3.0 Display Adapter USB cable is unplugged from your PC or Notebook before executing the installation program. - Page 19 USB DISPLAY ADAPTER USER MANUAL 2. After pressing the installation option, the InstallShield Wizard will launch, click Next> to continue 3. Read the license agreement and check “I accept the terms of the license agreement.” Click Next > to accept it and continue.
- Page 20 USB DISPLAY ADAPTER USER MANUAL 4. Driver installation proceeding….. 5. When Install Shield Wizard is complete, select “Yes, I want to restart my computer now.” Click Finish to restart.
- Page 21 (monitor/ projector) to the VGA/DVI connector of USB 3.0 Display Adapters and turn it on. 7. Connect the USB 3.0 Display Adapter into an available USB port of a PC or Notebook, After Inserting the USB 3.0 Display Adapter into an USB port, the “Installing device driver software”...
- Page 22 A. Connect all external display devices (monitor/ projector) to the VGA/DVI connector of USB 3.0 Display Adapters and switch power B. Connect the USB 3.0 Display Adapter into available USB port of PC or Notebook. After Inserting an USB 3.0 Display Adapter into a USB port, the systems will automatically start the installation procedure and the prompt message will pop-up on the task bar.
- Page 23 USB DISPLAY ADAPTER USER MANUAL The functions of the USB 3.0 Display Adapter will be activated after the computer restarted. You might see the mirror display shown on the display device. You can modify the corresponding position of each extend display via display settings.
- Page 24 The following procedure helps you to verify the driver installation status of USB 3.0 Display Adapter Right-click “My Computer” “Manager” “Device Manager” click “+” sign of “Display Adapter” & “Universal Serial Bus controllers” The picture below shows the installation process for a Single USB 3.0 Display Adapter...
- Page 25 The picture below shows the installation process for a Multiple USB 3.0 Display Adapter Device Driver Un-installation ※Unplug the USB 3.0 Display Adapter before un-installing the driver 1. Click “Start”→ Control Panel → Programs and Feature→ Uninstall or change a program Select j5 DISPLAY ADAPTER... Click Uninstall...
- Page 26 USB DISPLAY ADAPTER USER MANUAL 2. Confirm windows will pop out, Click to continue. 3. Driver un-installation proceeding…. 4. When the driver uninstall is completed select “Yes, I want to restart my computer now.” Click Finish to restart.
-
Page 27: Installation For Mac
USB 3.0 Display Adapter. Be sure that you are referring to the appropriate installation procedure before you begin installing. ※ Make sure the USB cable of USB 3.0 Display Adapter is unplugged from your Mac Desktop or Mac Notebook before executing the setup program. - Page 28 USB DISPLAY ADAPTER USER MANUAL 3. Click “Continue” to proceed 4. Click “Continue” to proceed...
- Page 29 USB DISPLAY ADAPTER USER MANUAL 5. Type in your password and click “OK” 6. Click “Continue Installation”...
- Page 30 USB DISPLAY ADAPTER USER MANUAL 7. Installation is processing…This will take a few moments 8. Click “Restart” to complete the software installation...
- Page 31 VGA/DVI connector of USB 3.0 Display Adapter and turn on the display device Plug the USB 3.0 Display Adapter into the USB port of your Mac Desktop or Mac Notebook. The screen will turn on automatically, and be in “Mirror Mode”...
- Page 32 USER MANUAL Verify Device Driver Installation The following procedure helps you to verify the driver installation status of USB 3.0 Display Adapter 1. GO , select “About This Mac” and select “ More Info…” The picture below shows the installation process for a Single USB 3.0...
- Page 33 USB DISPLAY ADAPTER USER MANUAL The picture below shows the installation process for Multiple USB 3.0 Display Adapter Device Driver Un-installation 1. Unplug the USB 3.0 Display Adapter from the USB port 2. To un-installation , please press the “Uninstall Driver” icon...
- Page 34 USB DISPLAY ADAPTER USER MANUAL 3. Click “Open” to proceed 4. Click “Uninstall and restart” to proceed 5. Type in your password to allow un-installation and click “OK” to proceed 6. Restart your system...
-
Page 35: Functions Instructions: Windows 8,7
Display ID Smart Display Device ID Detection Window 7 OS supports VESA defined DDC/EDID. It will be shown as the Display device ID whenever it is attached to the USB 3.0 Display Adapter. Display Resolution Fast Access to Display Resolution setting The resolution list will show when moving the cursor on Display Resolution. - Page 36 USB DISPLAY ADAPTER USER MANUAL Display Orientation The Orientation allows you to turn the display device, which is connected to USB 3.0 Display Adapter...
- Page 37 USB DISPLAY ADAPTER USER MANUAL Display Mode Extended mode (Default) This feature allows the display device attached to the USB 3.0 Display Adapter to work as an “extended” display of the on-board screen. You can adjust the position by clicking “number” of the display first and...
- Page 38 USER MANUAL Mirror mode-Duplicate This feature allows the same contents of the on-board screen to be displayed to the screen of the USB 3.0 Display Adapter You can select “Duplicate these displays” and click “Apply” Note: The resolution for the secondary and primary displays must be the same when using Mirror Mode (This may be lower than the preferred resolution for the display).
- Page 39 USB DISPLAY ADAPTER USER MANUAL Primary mode When you want to switch the enabled monitor as main display and extend view to on-board screen. Please choose the “Number” of the main display you want it to be and check on “Make this my main display”.
- Page 40 USB DISPLAY ADAPTER USER MANUAL Super Utility A super utility provides more options, you can find the icon on the lower right task bar Identify Monitors When “Identify Monitors” is selected, a serial number will be shown at the upper right corner of the display devices. You can see the serial number of each display when using the Hotkey function.
- Page 41 USB DISPLAY ADAPTER USER MANUAL ※Using Hotkeys Default setting is Ctrl + Display No. Click the window you want to move at the task bar to become active, and then press Hotkey ※Setting Hotkeys For example: Move window to Display03, and automatically enlarge it to full screen.
- Page 42 USB DISPLAY ADAPTER USER MANUAL Display Setting Fast access to the system “Display Setting” Fix Position This function helps you arrange the positions of all the display locations you have set in Display > Screen Resolution. After “Display Location Setting”, make a “Check”...
-
Page 43: Functions Instructions: Windows Xp
ID whenever it is attached to the USB 3.0 Display Adapter. If there is no display device attached to the USB 3.0 Display Adapter the ID will show up as “Unknown Monitor.” If the attached display device... - Page 44 USB DISPLAY ADAPTER USER MANUAL Display Resolution Default Resolution: 1024 x 768x 32 bit The resolution list will show up when you move the cursor over Display Resolution. Select the resolution you want. Display Rotation The Display Rotation allows you to turn the display device, which is connected to USB 3.0 Display...
- Page 45 USB DISPLAY ADAPTER USER MANUAL Display Mode Extended (Default Mode) A default display mode allows the attached USB 3.0 Display Adapter enabled display device to work as “Extended” display of the on- board screen. This extended working space feature improves work efficiency.
- Page 46 USB DISPLAY ADAPTER USER MANUAL Primary Mode When Primary is selected, the display device, which is connected to USB 3.0 Display Adapter, will become the main display, the display of the internal graphics card will automatically switch to be the extended display and act as an extension desktop.
- Page 47 USB DISPLAY ADAPTER USER MANUAL Identify Monitor When Identify Monitors is selected, a serial number will be shown at the upper right corner of attached display device. You can use the Hotkey function to find out the serial number of each display.
- Page 48 USB DISPLAY ADAPTER USER MANUAL ※ Using Hotkey Default setting is Ctrl + Display No. Click the window you want to move on task bar to become active, and then press Hotkey. ※ Setting Hotkey For example: Move window to Display03, and automatically enlarge it to full screen.
-
Page 49: Functions Instrutions: Mac
On this screen, you can adjust the resolution, display mode and color range. Display Mode Click on the “Arrangement” tab, and uncheck “mirror display” to un- Mirror the screen. You will automatically see another window appear on the screen that represents the USB 3.0 Display Adapter. - Page 50 USB DISPLAY ADAPTER USER MANUAL You can move the menu bar to any display to assign any display to Primary. If you cannot see the Display window to adjust your secondary monitor resolution, click on the “Gather Windows” button.
- Page 51 USB DISPLAY ADAPTER USER MANUAL Space Click “Show Spaces in menu bar.” You should see the space number on the menu bar that you can choose any space on the list at any time. F8: you will see the Space Layout with a single keystroke. You can draw...
- Page 52 USB DISPLAY ADAPTER USER MANUAL Exposé View different windows with a single keystroke. F9 : view all open windows F10: view windows of the current application only F11: show desktop *For more windows arrangement functions, please see Apple’s computer...
-
Page 53: Trouble Shooting
- Check to make sure that the device is plugged in correctly to the host system. - Make sure that the USB port that you are using is USB Display Adapter. - Unplug the USB cable of USB Display device and re-insert it. - Page 54 - Video rendering using hardware overlays is supported. - Some DVD playback software packages do not support playing on a second display adapter of any kind. You may try to open the media player in the secondary display first before you start playing the DVD.
-
Page 55: Technical Support
2. Online Support Please visit the j5 create website (www.j5create.com) to find the latest software for your device. If you are still experiencing the same issue, you can submit a description of your problem via email service@j5create.com... -
Page 56: Regulatory Compliance
USB DISPLAY ADAPTER USER MANUAL REGULATORY COMPLIANCE This equipment has been tested and found to comply with FCC Part 15 Subpart B § 15.109/15.107 Class Operation is subject to the following two conditions: • This device may not cause harmful interference •... -
Page 57: Warranty Of J5 Create
; (g) damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of j5create or a j5create Authorized Service Provider; (h) a product or part that has been modified to alter functionality or capability without the written permission of j5create;...