Roland VS-1680 Appendices page 18

Special Key Operations
[SHIFT] + [NEXT]:
[PLAY (DISPLAY)] + [TAP]:
FUNCTION buttons
[SHIFT] + [F1]:
[SHIFT] + [F2]:
[SHIFT] + [F3]:
[SHIFT] + [F4]:
[SHIFT] + [F5]:
[SHIFT] + [F6]:
Other
[SHIFT] + [PAGE]:
[SHIFT] + [PLAY]:
[SHIFT] + [SCRUB]:
[SHIFT] + [TO]:
[SHIFT] + [FROM]:
[SHIFT] + [VARI PITCH]:
[SHIFT] + [UNDO]:
[SHIFT] + [TAP]:
[SHIFT] + [EXT SYNC]:
[SHIFT] + [LOOP]:
[SHIFT] + [AUTO PUNCH]:
[SHIFT] + [ ] [ ]:
[SHIFT] + TIME/VALUE dial:
STATUS button + [CLEAR]:
18
If there is a phrase on current time, move to the end of that phrase. If not,
move to the beginning of the next phrase (when PREVIOUS/NEXT Sw is
"MARKER"). Move to the next marker (when PREVIOUS/NEXT Sw is
"PHRASE")
Register a marker for audio CD track number
To Song condition
To Track condition
To Effect condition (EFFECT A)
To Effect condition (EFFECT B)
To System condition
To Utility condition
Popup the Jump setting page
Switch the Graphic display
Popup the Scrub length setting page
Popup the Preview to length setting page
Popup the Preview from length setting page
Popup the Vari pitch setting page
Popup the Redo setting page (when the UNDO indicator is lit)
To the Tempo map setting page
To the Sync source setting page
To the loop start/end point setting page
To the punch in/out point setting page
Move the range of display to edit (Pane)
Modify the value at 10 times the usual speed. In Play condition when the cursor
is displayed at the sub frame of the time code display, move the current time in
units of approximately 1/100 frame.
Cancel the all routing of mixer section.