Roland VS-1680 Appendices page 17

Transport Control buttons
[SHIFT] + [STORE(ZERO)]:
[SHIFT] + [SONG TOP(REW)]:
[SHIFT] + [SONG END(FF)]:
[SHIFT] + [SHUT/EJECT(STOP)]:
[SHIFT] + [RESTART(PLAY)]:
[REC] + STATUS buttons:
[STOP] + STATUS buttons:
LOCATOR/SCENE buttons
[CLEAR] + LOCATOR buttons(1–8):
[CLEAR] + [TAP]:
[SHIFT] + [CLEAR] + [TAP]'[YES]:
[BANK] + LOCATOR buttons(1–8):
[SCENE] + [TAP]:
[SCENE] + [PREVIOUS]:
[SCENE] + [NEXT]:
[SCENE] + [REC]:
[SHIFT] + [SCENE]:
[SHIFT] + [START(1)]:
[SHIFT] + [END(2)]:
[SHIFT] + [FROM(3)]:
[SHIFT] + [TO(4)]:
[SHIFT] + [CLEAR] + [START(1)]:
[SHIFT] + [CLEAR] + [END(2)]:
[SHIFT] + [CLEAR] + [FROM(3)]:
[SHIFT] + [CLEAR] + [TO(4)]:
[SHIFT] + [PREVIOUS]:
Store song data to the disk drive
Move to the time where the first sound of the song is recorded
Move to the time where the last sound of the song is recorded
Shut down
Restart (after shut down)
Switch the status to REC (indicator blinks red)
Switch the status to PLAY(indicator lights green)
Clear the setting of locators
Erase a marker
Erase all markers
Switch the locator bank
Execute snapshot (When Automix is "on")
Gradation to mixer setting of previous marker (when Automix is "on")
Gradation to mixer setting of next marker (when Automix is "on")
Automix Realtime recording (when Automix is "on.")
Transmit the condition of the digital mixer as MIDI data from MIDI OUT
connector
Enter the current time as track edit start point. If it has been already set,
move to that time (except track condition).
Enter the current time as track edit end point. If it has been already set,
move to that time (except track condition).
Enter the current time as track edit from point. If it has been already set,
move to that time (except track condition).
Enter the current time as track edit to point. If it has been already set,
move to that time (except track condition).
Clear the track edit start point (except track condition)
Clear the track edit end point (except track condition)
Clear the track edit from point (except track condition)
Clear the track edit to point (except track condition)
If there is a phrase on current time, move to the beginning of that phrase.
If not, move to the end of the previous phrase (when PREVIOUS/NEXT
Sw is "MARKER"). Move to the previous marker (when
PREVIOUS/NEXT Sw is "PHRASE")
Special Key Operations
17