Table of Contents
Advertisement
18 electrolux
Carry out the building in of the hob
as follows:
1. Put
the
supplied with the hob, on the edges of
the cut out, taking care that the sealings
meet without overlapping;
2. place the hob in the cut out,
taking care of its centring;
3. fix the hob with the relevant
screws (Fig. 7). The traction of the
screws is able to trace the sealing, any
excess of which can then be easily
removed.
If several 30 cm hob are to be
installed side by side into the same
cut out, an assembly kit including a
support
supplementary sealings is available
at our After Sales Centres. The
relevant installation instructions are
supplied within the kit package.
relevant
sealings,
side
bracket
a) seal
and
a
Fig.7
Advertisement
Table of Contents
