Page 4
6. Headphones can be plugged into the front panel mounted HEADPHONE (4) jack. 7. The PS-924 comes with a front panel XLR LIGHT (5) jack. This jack is for use with a gooseneck light like the Gemini GNL-500. NEVER plug a microphone into this jack.
Page 5
SEND (50) control. To receive the signal back into the PS-924, you must first turn on the RCV ON (51) switch (LED (52) will light). The level of the signal being received can be adjusted with the RECEIVE (53) control.
LOW BATTERY INDICATOR: A low battery indicator is included with the PS-924. when changing the battery, make sure the unit is plugged in and the power is ON. Failure to adhere to this will result in lost memory. The low battery indicator is ON when the selected memory bank LED blinks.
Page 7
Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Gemini Sound Products Corp. shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual.
Need help?
Do you have a question about the PS-924 and is the answer not in the manual?
Questions and answers