2. Make sure that the POWER (1) switch is in the OFF position. 3. The PS-540i is supplied with 3 sets of output jacks. The OUTPUT AMP (3) jacks are used to connect to your main amplifier. The OUTPUT REC (5) jacks can be used to connect the mixer to the record input of your recorder enabling you to record your mix.
of one source into another. The left side of the CROSSFADER (32) is CHANNEL 1 and the right side is CHANNEL 2. 1. Unscrew the outside FADER PLATE SCREWS (B). Do not touch INSIDE SCREWS (C). 1 2 3 1 2 3 2.