How To Remove The Depth Regulator Nose; For The Scoring (Diamond Scraper) - Roland EGX-30A User Manual

How to Remove the Depth Regulator Nose

For the Scoring (Diamond scraper)

* Use SELECT key to choose "SCORE" as the mode.
When performing scoring, be sure to purchase the diamond scraper (optionally available).
Procedure

* If the depth regulator nose is installed, it
should be removed.
Retighten the tool mounting screw to secure in place.
Loosen
Chapter 3 Getting Ready for and Performing Cutting
3-3 Installing a Tool
Rotate in the direction of the
arrow, line up with the groove,
and remove.
Loosen the tool mounting screw and
insert the special adapter into the tool
carriage.
31