Disposal; Tips For Environmental Protection - Electrolux EDE420E Instruction Booklet

125980060.qxp 2004.07.28 09:27
General safety
• It is dangerous to alter the specifications or
attempt to modify this product in any way.
• Under no circumstances should you attempt to
repair the machine yourself. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local
Electrolux Customer Service on 131349.
Always insist on genuine Electrolux spare parts.

Disposal

• Packaging materials
The materials marked with the symbol
recyclable.
This means that they can be recycled by disposing
of them properly in appropriate collection
containers.

Tips for environmental protection

To save energy and to help protect the
environment, we recommend that you follow these
hints:
• Try to load the maximum capacity of the machine
as small loads are uneconomical.
• Always load well spun laundry. The higher the spin
speed, the lower the electricity consumption and
the shorter the drying times.
• Do not over dry laundry, this avoids creasing and
saves energy.
Select the drying programme according to the
type of laundry and the required degree of
dryness.
Page 5
are
5
Child safety
• The appliance is not intended for use by young
children or infirm persons without supervision.
• Young children should be supervised to ensure
that they do not play with the appliance.
• The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children
danger of suffocation! Keep them out of
children's reach.
• Make sure that children or pets do not climb into
the drum.
• When the appliance is to be scrapped, cut off the
electrical supply cable and destroy the plug with
the remaining cable. Disable the door catch in
order to prevent children from becoming trapped
inside while playing.
• Machine
Use authorised disposal sites for your old
appliance. Help to keep your country tidy!
• To utilize the maximum load, laundry which is to
be dried ready to put away (store dry) can be
dried together with items to be ironed. To do this,
select the programme for iron dry, remove the
iron dry items at the end of the programme and
then finish dry the rest of the load.
• Clean the filter regularly to avoid excessive drying
times and high electricity consumption.
• Ventilate the room well. The room temperature
should not exceed +35°C during drying.