Clock Functions; Using The Accessories - Electrolux EBGL7 User Manual

8 electrolux

CLOCK FUNCTIONS

Electronic programmer
6
1 Temperature / Time display
2 Heat indicator
3 Clock function indicators
4 Selection button
5 Change display
6 Temperature check
Setting the clock functions
1. Push the Selection button again and
again until the desired function indicator
flashes.
Clock function
Time of day
Minute minder
Duration
End
Duration and End
used at the same time, if the oven is to
be switched on and off automatically lat-

USING THE ACCESSORIES

Inserting the oven accessories
Put in the slide-in accessories so that the
double side edges are at the back of the
oven and point down to the bottom. Push
the slide-in accessories between the guide-
bars of one of the oven levels.
The flat baking tray and the oven shelf
have double side edges. These edges
and the shape of the guide-bars cau-
ses the anti-tilt safety for the oven ac-
cessories.
1 2 3
5 4
Shows the time. To set, change or check the time.
To set a countdown time. A signal sounds, after the time period is com-
pleted. This function has no effect on the operation of the oven.
To set how long the oven has to be in operation.
To set the switch-off time for an oven function.
can be
2. To set the time for Minute Minder
Duration or End
knob. The related function indicator
comes on.
When the time period is completed, the
related function indicator flashes, the dis-
play shows 0.00 and an acoustic signal
sounds.
3. To stop the signal and the flashing:
- with Minute Minder push a button
- with Duration and End turn the oven
functions selector to the position Off.
With Minute Minder an acoustic signal
also sounds when 90% of the time peri-
od is completed.
With the functions Duration
End the oven switches off automat-
ically.
Application
er. First set Duration
.
,
, use the + / -
and
, then End