Table of Contents
Advertisement
4. O
PERATING
Configuring the Starting Address
Control Panel Functions
4. Operating Instructions
I
NSTRUCTIONS
The SlimPAR™ Pro TRI fixture uses 9 DMX channels in its maximum setting. In this DMX
configuration/personality, the highest channel that the fixture may be set to in order to function
properly is 504. Any address higher than this will prevent access to all of the channels, while in this
mode; however, if you desire to use one of the other DMX channels configurations (personalities),
please consider the total DMX channels when selecting a DMX address.
If this is your first time using DMX, we recommend reading the "DMX Primer" section in the
"Appendix".
Access control panel functions using the four buttons located directly underneath the LED display
on the included wired remote.
B
UTTON
Used to scroll through the
current operating mode,
<MENU>
as well as back out of the
current menu option
Used to select a move to
the right in the menu map
<ENTER>
and select a value and
store it to memory
Used to select increasing
<UP>
advancement in the value
Used to select decreasing
<DOWN>
advancement in the value
The Control Panel shows the current state of the unit. It is used to select the operating
mode, as well as the sub-features. For a detailed layout of the control panel functions,
please see the "menu map" section.
F
UNCTION
9
MENU ENTER UP
DOWN
6/24/2013 11:35 AM
Advertisement
Table of Contents
