Brother 891-Z01 Operation Manual page 24

■ Checking the Trial Cutting Results
Adjust the blade extension according to the trial cutting
results.
Repeatedly perform trial cutting and adjust the blade
extension until the material is cut cleanly.
With an Appropriate Blade Extension
When the material is peeled off, a faint trace of
the cut remains on the mat surface.
With a Blade Extension That Needs to be
Adjusted
Trial cutting results
Too Little of a Blade Extension:
Part of the cut
material remains Turn the holder cap half a
when it is peeled off.
marking to the right. (b)
Too Little of a Blade Extension:
The material is not
Turn the holder cap one marking
clearly cut.
to the right. (b)
Too Much of a Blade Extension:
There are deep cuts
completely through Turn the holder cap one marking
the mat.
to the left. (a)
a
Note
• Be careful that the blade does not extend too
much. If there is too much of a blade extension,
the material may not be cut cleanly and the mat
will deteriorate quicker.
22
Tips for adjustment
b