Table of Contents
Advertisement
INSTALLATION
WARNING!
Refer to "Safety information" chap-
ter.
Before the installation
Before the installation of the appliance, re-
cord the information below from the rating
plate. The rating plate is on the bottom of
the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................
BUILT-IN APPLIANCES
• Only use the built-in appliances after you
assemble the appliance into correct
built-in units and work surfaces that align
to the standards.
ASSEMBLY
CONNECTION CABLE
• The appliance is supplied with the con-
nection cable.
• Replace the damaged mains cable with
a special cable (type H05BB-F Tmax
90°C; or higher). Speak to your local
Service Centre.
TO ATTACH THE SEAL.
• Clean the worktop in the area of the cut
out section.
• Bond the seal stripe supplied on the low-
er edge of the appliance along the outer
edge of the glass ceramic. Do not ex-
tend it. Let stay the cut ends in the mid-
dle of one side. When, you cut it to
length (add some mm), push the two
ends together.
min.
500mm
min.
50mm
R 5
mm
+1 mm
490
270
ENGLISH
15
min.
50mm
min.
5mm
600
mm
+1 mm
Advertisement
Table of Contents
