Care And Cleaning - Electrolux LFV439K User Manual

Refer to cleaning the charcoal filter or
replacing the charcoal filter in care and
cleaning chapter.
To reset the function touch
To activate or deactivate function:
1. Switch on the control panel. Make sure
that the panel is on.

6. CARE AND CLEANING

6.1 Notes on cleaning
Cleaning Agents
Keep the hood
clean
Charcoal filter
6.2 Cleaning the grease filter
Filters are mounted with the use of clips and
pins on the opposite side.
To clean the filter:
1. Pull the cover to open it.
for 3 seconds.
Do not use abrasive detergents and brushes.
Clean the surface of the appliance with a soft cloth with warm water and a mild detergent.
After cooking some parts of appliance can get hot. To avoid stains appliance must be
cooled down and dried with clean cloth or paper towels.
Clean stains with a mild detergent.
Clean the appliance and grease filters each month. Clean the interior and grease filters
carefully from fat. Fat accumulation or other residue may cause fire.
Follow the instructions for cleaning the accessories when filter notification is on. Refer to
Filter notification in daily use chapter.
Grease filters can be washed in a dishwasher.
The dishwasher must be set to a low temperature and a short cycle. The grease filter may
discolour, it has no influence on the performance of the appliance.
The time of saturation of the charcoal filter varies depending on the type of cooking and
the regularity of cleaning the grease filter.
2. To activate function touch
seconds.
If the function is activated, the filter icon
flashes five times.
3. To deactivate function touch
seconds.
If the function is deactivated, the filter icon
turns on for 4 seconds.
2. Press the handle of the mounting clip on
the filter panel underneath the hood (1).
66
for 3
for 3
1