Sound Feedback; Auto Power; Standby Control - Samsung UD55C User Manual

General

Sound Feedback

Auto Power

Standby Control

Lamp Schedule
OSD Display
Power On Adjustment
Repeat Mode
- The displayed image may differ depending on the model.
Low
Off
Auto
Off
0 sec
Sound Feedback
Your product gives sound feedback when you use product.
Sound Feedback is enabled by default. Turn off
This function is enabled by default. The volume can be adjusted or muted.
―
Off Low Medium High
/ / /
Auto Power
Enabling this option will automatically power on the product if the power cable is connected.
Off On
/
•
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Auto
•
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
On
•
Power-saving mode will activate if no input signals are detected.
Off
•
No Signal
The message will appear if no input signals are detected.
― The
Standby Control
option is only enabled when
― If
No Signal
is displayed although a source device is connected, check the cable connection.
Sound Feedback or adjust its volume.
Source is set to PC, DVI, HDMI1, HDMI2 or DisplayPort.
128