General
Sound Feedback
Auto Power
Standby Control
Lamp Schedule
OSD Display
Power On Adjustment
Temperature Control
- The displayed image may differ depending on the model.
Sound Feedback
Your product gives sound feedback when you use product.
Off
Sound Feedback
This function is enabled by default. The volume can be adjusted or muted.
Off
―
Off
Auto
Auto Power
Off
Enabling this option will automatically power on the product if the power cable is connected.
•
0 Sec
Standby Control
77
You can set the screen standby mode to be applied when an input signal is received.
•
― Available in
•
•
― The
― If
is enabled by default. Turn off
Low
Medium
High
/
/
/
Off
/
On
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
No Signal
The message
will appear if no source device is connected.
PC
/
DVI
mode.
On
Power-saving mode will activate if no input signals are detected.
Off
No Signal
The message
will appear if no input signals are detected.
Standby Control
option is only enabled when
No Signal
is displayed although a source device is connected, check the cable connection.
Sound Feedback
or adjust its volume.
Source
is set to PC, DVI.
135