Table of Contents
Advertisement
3.1 Turning the Power On
If the unit has been off for at least five seconds, take the following steps to power it up.
1. Slide up the power switch cover which is located on the right side of the front of the
computer.
2. Press the power switch to start the computer. The computer will start after a brief delay.
3. Slide the power switch cover back down to prevent accidentally pressing the power button.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
TeamPoS7000_User Guide (F-Series)_D900000477.pdf
Revision 1.0 - June 1, 2012
NOTE: If nothing is displayed on the screen for 10 seconds or more after the
power has been turned on, verify the following:
• Is the power indicator lit (see
• Is the power circuit active?
• Is the power cord connected to the outlet?
• Was the power turned back on within five seconds of being turned off?
(The power must be not turned back on until at least five seconds after the power
has been turned off.)
• If the above checks reveal no abnormalities, contact your support department.
Basic Operations
page
9)? If not, the system is not receiving power.
Chapter 3 - Basic Operations
Turning the Power On - 19
3
Hide quick links:
Advertisement
Table of Contents
