Passport Group Scang - Motorola HT1250-LS+ User Manual

Note: This feature is automatically enabled in
your radio and not through the radio
menu or through a preprogrammed scan
button.
PASSPORT GROUP SCAN
(PASSPORT TRUNKED OPERATION ONLY)
PassPort Group Scan scans talkgroups within
the selected PassPort Trunked zone, as
programmed by your dealer. Up to 16 different
talkgroups can be programmed into each Scan
list, with one Scan list assigned to each position
on the Zone Selector knob. You can edit these
Scan lists through your radio's menu (see page
66).
When PassPort Group Scan is enabled:
The G symbol appears on the display.
•
• The LED indicator blinks green during
PassPort Group Scan operation; it stops
blinking when your radio switches to an
active talkgroup or channel.
62
English
Note: PassPort Group Scan is not available
when registered on an affiliated (non-
home) site.
If you switch to another PassPort zone,
G
LTR, or Conventional zone while your
radio is scanning, scanning resumes
upon return to the PassPort zone where
PassPort Group Scan was enabled.
If your radio is turned off while scanning,
the radio resumes scanning when you
turn it back on. If your radio registers on
a non-home site, scanning is not enabled
until your radio registers at its home site.
To start PassPort Group Scan operation:
Press the preprogrammed Scan button (see
page 16).
To stop PassPort Group Scan operation:
Press the preprogrammed Scan button again.
To start or stop PassPort Group Scan operation
through the menu:
)
1 to enter Menu mode.