Motorola HT1250-LS+ User Manual page 46

–or–
+
desired alias using the DTMF keys to start an
alphabetical search. (Full keypad model only.)
–or–
Enter the ID number of the radio you wish to
call. (Full keypad model only.)
–or–
Press * and the DTMF key (0 to 9) (if pro-
grammed by your dealer) corresponding to
the radio you wish to call.
Note:
5 Press the PTT button to send the Selective
Call.
• While the Selective Call is being estab-
• A talk permit tone sounds.
44
English
?
or then press the first letter of the
This option does not require you to
press the PTT button to send the
Selective Call.
F
lished the blinks and the LED indicator
flashes red momentarily.
6 Once the Selective Call is received and
acknowledged by the target radio, the
plays solid.
Notes:
• If the Selective Call cannot be established,
you see: No Acknowledge
for 5 seconds. The LED indicator turns off.
• If all channels are busy while attempting a
Selective Call,
you see:
System Busy
and will hear a delayed busy tone as long
as the PTT button is pressed.
If the PTT button is kept pressed and the
system frees up a channel, the radio auto-
matically attempts to re-establish the call.
(
• to end the Selective Call and revert to
talkgroup dispatch, or press the prepro-
grammed Selective Call button. You can
then manually re-initiate the call. (See Step
1.)
F
dis-