Adventurer 3500; Quick Start Guide - Memory-map Adventurer 3500 User Manual

USER GUIDE

Quick Start Guide

Want to get using your GPS straight away? This quick start guide will quickly familiarise you with the
Adventurer 3500 and its features.
1) Charging the Adventurer 3500
Gently open the flap from the bottom of the GPS and
connect either the supplied mains charger or USB PC cable. A
red light will illuminate on the GPS to indicate it is charging and
then turn green when the battery is fully charged.
2) Turning on the GPS
Hold down the button on the front of the unit and
wait for the unit to start up. When the GPS is ready,
slide the Power On slide button to the right. From the main menu tap the Maps button to put the
GPS in outdoor mode.
3) Viewing your position
The GPS will begin locking onto your position straight away. When a lock has been
acquired the Padlock icon will illuminate. Tap the icon to jump to your current
location and display it on the map. Your position is displayed with the Position
icon.
As your position changes, the map will automatically scroll with you. If you want to
move the map manually drag your finger or stylus across the screen. You can also
use the zoom in and zoom out buttons to make the map larger or smaller.
To view information such as your current speed and heading tap the Menu
button then the Settings & Overlays button and then from the drop-down
menu select GPS > Position. The window can be moved and resized and closed
using the X in the top right corner.
4) Viewing your track
As you move, the Adventurer 3500 will automatically record where you have
been by drawing a track behind you. You can view information such as how far you have been by tapping and
holding anywhere on this track and then tapping Properties on the menu that appears. You can also view
how far you have travelled by a quick press of the button on the front of the GPS. Press this button again to
return to the map.
5) Shutting down the GPS
When you have finished using the GPS and wish to turn it off, please make sure you close down the Memory-
Map software first by tapping the Extended Menu icon followed by the Exit icon. You can then turn the GPS
off by holding down the front button and selecting Power Off.
Alternatively, press the button on the front of the unit and then select Main Menu and then turn the GPS off
by holding down the front button and selecting Power Off.
Padlock icon
Position Icon
Zoom In
Zoom Out
Extended Menu
Settings & Overlays
Exit