Sending Digital Map Shop Maps To Adventurer - Memory-map Adventurer 3500 User Manual

Method 3 – Sending an enclosed area
To gain more control over the area of map you are sending you can send an area enclosed by a route that you
have drawn. To do this please follow the steps below:
1) Exit Memory-Map on the 3500 if it is running by tapping the Exit icon and then connect your Adventurer
3500 to your PC with the supplied USB cable. Tap the Press to Connect button on the screen and the 3500
will be seen by your PC as a removable drive.
2) In Memory-Map on your PC open the map you wish to send and move to the area you require. Click the
Route button on the toolbar and create a route around the area you wish to send. You can zoom out if you
wish so you can see more of the map. While creating a route you can use the arrow keys on your keyboard to
move the map around.
When you are finishing your route make sure the last waypoint finishes on top of the first one so that you
have made an enclosed route.
3) Right-click on the route you have created and select the menu option Operations > Enclosed Area >
Send to Mobile Device...
A screen similar to the one below will appear:
4) If you wish to give map a name type this into the Name box. Please also make sure that the size of the map
does not exceed 400MB. If it does, click the Cancel button and resize your route
Click the Storage card on PC button and then the
button.
In the Browse for Folder window choose the Removable Drive that contains the SD card inside the unit. It
can be easily identified as it will contain a number of Memory-Map folders and a Userdata folder. Double-click
the Maps folder to select it and then click OK to send the map to the device.
5) Important – Safely remove the 3500 from your PC by right-clicking on the drive in Computer and selecting
Eject from the menu. If you are using Windows XP you will need to use the Safely Remove Hardware
option in the system tray to remove the device. Not doing so could corrupt the card data making it unusable.