Device Settings; Power & Battery Settings - Memory-map Adventurer 3500 User Manual

Additional Device Options
Additional options for the Adventurer 3500 can be
accessed from the Settings button on the main screen
when you turn on the GPS. These settings include:
Brightness –Adjust the brightness of the backlight. The
brighter the backlight the easier the unit will be able to be
seen in daylight. A bright backlight setting will consume
more power, however.
Volume –Change the volume level from the internal
speaker. You can also turn off the sound made when
tapping the screen by setting Touch Tone to off.
Language – Change the language of the main menu. The language in Memory-Map itself can be changed
separately, if required.
Touch Calibration – Recalibrate the touch screen if you are finding screen taps have become inaccurate. The
screen will be calibrated for you initially, so you do not need to do this unless required.
Power Save – Allows you to control whether the backlight or the device turns off after a period of inactivity.
Due to the way Memory-Map records your tracklog when running we strongly recommend setting the Power
Down Time to Always On when using Memory-Map on the device. This feature can be used with other
applications available for the device, such as the Golf software. The Backlight feature can only be used in
other Apps available for the device.
Information – Provides information on the hardware and allows you to update the device as updates are
available.
Charging the device and getting the most from the battery
The Adventurer 3500's battery can be charged using the included mains charger, car charger or USB charger
when connected to your PC. For the quickest charge we recommend using the mains charger. The light on the
front of the unit will turn red when charging and then turn green when the unit is fully charged.
When using the GPS you can quickly put the unit to sleep by pressing the button on the front of the unit and
then selecting Sleep from the menu. When in Sleep mode the Adventurer 3500 will go into a low power state,
preserving the battery. When you press the button on the front of the unit the 3500 will go straight into map
mode.