Download Print this page

ABIT NF7 User Manual: Front Panel Switches & Indicators Headers

Socket 462 system board.
Hide thumbs

Advertisement

Hardware Setup
(5). Front Panel Switches & Indicators Headers
This header is used for connecting switches and LED indicators on the chassis front panel.
Watch the power LED pin position and orientation. The mark "+" align to the pin in the figure below
stands for positive polarity for the LED connection. Please pay attention to connect these headers. A
wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could
cause system malfunction.
NF7/NF7-S/NF7-M:
HLED (Pin 1, 3):
Connects to the HDD LED cable of chassis front
panel.
RST (Pin 5, 7):
Connects to the Reset Switch cable of chassis
front panel.
SPK (Pin 15, 17, 19, 21):
Connects to the System Speaker cable of chassis.
SLED (Pin 2, 4):
Connects to the Suspend LED cable (if there is one) of chassis front panel.
PWR-ON (Pin 6, 8):
Connects to the Power Switch cable of chassis front panel.
PLED (Pin 16, 18, 20):
Connects to the Power LED cable of chassis front panel.
NF7-S2/NF7-S2G:
2-9
User's Manual

Advertisement

   Also See for ABIT NF7

   Related Manuals for ABIT NF7

This manual also for:

Nf7-s, Nf7-s2, Nf7-m, Nf7-s2g

Comments to this Manuals

Symbols: 0
Latest comments: