Setting Up; Installation - Geemarc Jupiter 10 User Manual

1 - INSTALLATION

- Connect the handset cord.
- Connect the telephone line. (Classified TNV-3 according to EN60950 stan-
dard).
- Lift the handset to ensure that you can hear the dial tone. The call timer and
the in use LED will light.
- Replace the handset and the LCD display will show as follows:
Call timer indicate :
- The last 2 digits will start counting up.
The LCD display has 3 differents formats:
- Time display : this is the default format.
- Call timer display:

SETTING UP

Minutes
Hours
6
00-00
16-45-30
Minutes
05-18
Minutes Secondes
Seconds
Secondes