Adjusting The Phone's Volume Settings; Alert Notification - Sanyo SCP-8100 User Manual

Adjusting the Phone's Volume Settings

To adjust the ringer/key volume:
1. Press
to access the main menu.
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight Ringer/Key Vol and press
5. Select the menu you wish to change and press
Ringer Volume for adjusting Ringer tone volume.
Start-up/Pw-off for adjusting Start-up/Power-off tone volume.
Key Beep for adjusting Key Beep tone volume.
6. Adjust the volume level and press
Vibrate to set the vibrate feature to on and the ringer volume to
off. (Only appears in Ringer Volume Setting.)
Ringer Off to set the Voice Call ringer volume to off.
(Only appears in Ringer Volume Setting.)
Silence All to set all the ringer volume to off. (Only appears in
Ringer Volume Setting.) See "Silence All" on page 22.
To adjust Earpiece volume:
1. Press
to access the main menu.
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight Receiver Vol. and press
5. Adjust the volume level and press
Tip:
You can adjust the ringer volume in Standby mode by using Volume
keys, and adjust earpiece volume during a call by using
Navigation key or Volume keys.
.
.
.
.
.
.
.
.
.
/ of the

Alert Notification

Your phone comes with several different options to keep you
aware of what's going on by sounding the alert or ringer.
Service sets alert On or Off for network services parameter
changes.
Voicemail sets alert to notify you of caller's message(s).
Messaging sets alert to notify you of text message(s).
Minute Beep sets a minute reminder that beeps ten seconds
before the end of each minute during a call.
Signal Fade sets alert to notify you when your phone loses a
signal during a call.
To set the alerts:
1. Press
to access the main menu.
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight Alerts and press
5. Highlight your desired option and press
6. If you selected Service, Minute Beep or Signal Fade, select On or
Off. If you selected Voicemail or Messaging, select Once,
Repeat Alert or Off.
Tip: Repeat Alert sounds every two minutes for twenty minutes.
.
.
.
.