Panasonic BL-VT164 Series Operating Instructions Manual page 150

16 Use the camera on a wireless LAN [Wireless] (BL-VT164W/BL-VP104W)
[BSSID]
Displays the connected wireless router's MAC address. When a wireless router is not connected,
"00-00-00-00-00-00" is displayed.
[Authentication method]
Displays the authentication method (Open System, WPA-PSK, or WPA2-PSK) in accordance to the currently
selected encryption method.
[Encryption method]
Displays the currently selected encryption method (WEP, TKIP, or AES).
[Radio wave status]
Displays the signal strength (Bad, Normal, Good). These figures are just a guide and may not match the actual
wireless communication status.
The signal strength and connection status are displayed as follows.
•
Good: When the signal strength is about 60%-100%
•
Normal: When the signal strength is about 15%-59%
•
Bad: When the signal strength is about 0%-14%
150 Operating Instructions