Table of Contents
Advertisement
USING THE PHONE
The following settings are available:
1 - The V switch set to
and
activated (key is lighting).
The handset volume can be adjusted within the following values range :
4 dB / 8 dB / 12 dB / 16 dB.
2 - The V switch set to
and
activated (key is lighting).
The handset volume can be adjusted within the following values range:
16 dB / 20 dB / 24 dB / 28 dB.
In addition for both settings, you can use the tone control
slider switch
to increase treble and bass up to 10 dB.
Notes:
- Pressing the
key deactivates the additional amplification and the tone
control functions (Key is not lighting).
- You can leave the V slider switch to
position if the phone is always used by
impaired hearing user.
5 - PAGING THE HANDSET
If you wish to locate your handset simply follow the instructions below:
1 - Press the
key on the base unit located on the base front side.
2 - All registered handsets will be paged and will ring.
3 - Press twice the
on the located handset to stop the paging mode.
Pressing the
key on the base unit has the same effect.
6- TIMER
A timer will be displayed on the screen after starting the call. You can check the
call length by using this function.
17
Advertisement
Table of Contents
