Taking Out Discs - Epson PP-100 User Manual

Taking Out Discs

Follow the steps below to take out the published discs from the stackers.
1. Open the disc cover (only for output to Stacker 2 or 3), and take out the stacker.
2. Take out the published discs from the stacker. The output stacker differs according to
the publishing mode. Refer to the following table.
Output stacker
Stacker 2
Stacker 3
Stacker 4
Stacker 2
Note:
❏ Be sure to let CDs and DVDs to dry completely before using them or touching the printed
surface. Allow Epson specified discs to dry for at least 1 hour and other types of discs for at
least 24 hours.
❏ If the print position is misaligned, adjust it using the printer driver. For details, refer to the printer
driver Help.
❏ If the ink smears, adjust the color saturation. For details, refer to the printer driver Help.
Mode
Standard mode
Batch mode
Batch mode
Standard mode
External Output mode
Stacker 3
Number of discs
Up to about 50 discs
Up to about 50 discs
Up to about 5 discs
Stacker 4
Publishing Discs
50