Troubleshooting - Electrolux EGL6382 User Manual

52 www.electrolux.com

6. TROUBLESHOOTING

There is no spark when
lighting the gas.
There is no spark when
lighting the gas.
The flame is blown out
immediately after ignition.
The gas ring burns un-
evenly.
The appliance does not
operate.
The electrical cooking
zone does not heat up.
Problem Possible cause
• There is no electrical
supply.
• The burner cap and
crown are placed un-
evenly.
• The thermocouple is
not heated sufficiently.
• The burner crown is
blocked with food resi-
due.
• There is no electrical
supply.
• There is no electrical
supply.
• The wrong knob is
used to operate the
cooking zone.
Remedy
• Make sure that the ap-
pliance is connected
and the electrical sup-
ply is switched on.
• Do a check of the fuse.
If the fuse is released
more than one time, re-
fer to a qualified electri-
cian.
• Make sure that the
burner cap and crown
are in the correct posi-
tions.
• After lightning the
flame, keep the knob
pushed for approxi-
mately 5 seconds.
• Make sure that the in-
jector is not blocked
and the burner crown
is clear of food parti-
cles.
• Make sure that the ap-
pliance is connected
and the electrical sup-
ply is switched on.
• Do a check of the fuse.
If the fuse is released
more than one time, re-
fer to a qualified electri-
cian.
• Make sure that the ap-
pliance is connected
and the electrical sup-
ply is switched on.
• Make sure that you
turn the correct control
knob.
• Do a check of the fuse.
If the fuse is released
more than one time, re-
fer to a qualified electri-
cian.