Abit NF7 User Manual page 20

1-2
•
2 x USB 2.0 headers
•
1 x CD-IN
•
1 x IrDA
•
2 x IEEE 1394a headers (NF7-S)
•
2 x Serial ATA 150 connectors (NF7-S)
9. Back Panel I/O
•
1 x PS/2 keyboard, 1 x PS/2 mouse
•
1 x S/PDIF Out connector
•
Audio connectors (Front Speaker, Line-in, Mic-in, Center/Sub, Surround Speaker)
•
2 x USB, 1 x RJ-45 LAN connector
•
2 x Serial port connector, 1 x Parallel port connector (NF7/NF7-S)
•
1 x Serial port connector, 1 x Parallel port connector, 1 x VGA Connector (NF7-M)
10. SATA 150 RAID (NF7-S)
•
Onboard Silicon Image Sil 3112A SATA PCI Controller
•
Supports 2 channels of Serial ATA 150MB/s data transfer rate with RAID function (0/1)
11. IEEE 1394 (NF7-S)
•
Supports IEEE 1394a at 400/200/100 Mb/s transfer rate
12. Graphics (NF7-M)
•
NVIDIA GeForce4 MX class graphics processor
13. Miscellaneous
•
ATX form factor
•
Hardware Monitoring – Including Fan speed, Voltages, CPU and System temperature
14. Order Information
Model
NF7-S
NF7
NF7-M
The Serial ATA controller only supports Ultra DMA/ATA100 or higher hard drive. Do not
use hard drives under this specification, or it won't work.
This motherboard supports the standard bus speeds of 66 MHz/100 MHz/133 MHz that are
used by specific PCI, processor and chipset specifications. Exceeding these standard bus
speeds is not guaranteed due to the specific component specifications.
Specifications and information contained herein are subject to change without notice.
NF7/NF7-M/NF7-S
Chipset
nForce2 Ultra 400 + MCP-T
nForce2 Ultra 400 + MCP
nForce2 IGP + MCP
Features
SATA, IEEE1394, SoundStorm
Integrated GeForce4 MX
Chapter 1
TM